site.urun_teknik_cizim
Check Valves
Disc Type Check Valve
site.urun_kaynak
Metroend-Urun-Katalogu.pdf · site.urun_basili_sayfa
63
(PDF 66)
What it does
Check Valves
A check valve is an automatic safety component that allows fluid to pass in one direction only and closes off reverse flow by itself. It requires no external actuation: closing occurs mechanically when flow stops and back pressure builds up. Check valves are used to prevent backflow and water hammer at pump outlets, to prevent reverse flow on boiler feed lines, and to isolate branches on lines fed from more than one source. Spring-loaded types permit both vertical and horizontal installation, swing types operate with low pressure drop, and dual-plate and disc types are preferred where a short face-to-face dimension is required.
This is a general description of the product type; it has no counterpart in the source catalog and is awaiting company approval. The verified technical values for this product are only in the data plate above and in the dimension table.
Where it is used
Application areas
- 01 Chemical - Petrochemical
- 02 Water - Wastewater
- 03 Heating - Cooling Systems
- 04 Maritime Applications
- 05 ØD
- 06 Mining Applications
- 07 Power Stations
- 08 L
- 09 Ød
- 10 DN15 - DN100
- 11 Body : Brass Disc: St.Steel
Source: the “Application Areas” list on this product's catalog page.
site.urun_olculer
site.urun_olcu_tablosu
13 site.urun_satir × 5 site.urun_kolon
site.urun_yatay_kaydirin
| DN | ØD | Ød | L | KG |
|---|---|---|---|---|
| 15 | 40 | 15 | 16 | 0,09 |
| 20 | 47 | 20 | 19 | 0,14 |
| 25 | 56 | 25 | 22 | 0,20 |
| 32 | 76 | 31 | 28 | 0,47 |
| 40 | 82 | 39 | 32 | 0,62 |
| 50 | 95 | 48 | 40 | 1,00 |
| 65 | 115 | 63 | 46 | 1,52 |
| 80 | 132 | 75 | 50 | 2,10 |
| 100 | 152 | 89 | 60 | 3,15 |
| 125 | 184 | 112 | 90 | 8,00 |
| 150 | 209 | 132 | 106 | 10,20 |
| 200 | 264 | 175 | 140 | 21,50 |
| 250 | 328 | 225 | 200 | 40,00 |
site.urun_malzeme
site.urun_malzeme_ozellikleri
| site.urun_mat_no | site.urun_mat_parca_adi | site.urun_mat_part_name | site.urun_malzeme |
|---|---|---|---|
| 1 | GÖVDE DİSK YAY SEGMAN | PN16 PN40 BODY MS58 AISI304 / AISI316 DISC AISI304 AISI304 / AISI316 SPRING AISI304 AISI304 / AISI316 SEGMENT AISI304 AISI304 / AISI316 |
site.urun_ayni_kategoriden
site.urun_ilgili_urunler
Flanged Lift Check Valve Straight Type
Check Valves
- Bağlantı
- DIN1092-2
- Çalışma basıncı
- PN16
- Çalışma sıcaklığı
- -10°C / +220°C
Flanged Lift Check Valve Angle Type
Check Valves
- Bağlantı
- DIN1092-2
- Çalışma basıncı
- PN16
- Çalışma sıcaklığı
- -10°C / +220°C
Flanged Swing Check Valve
Check Valves
- Bağlantı
- DIN1092-2
- Çalışma basıncı
- PN16
- Çalışma sıcaklığı
- -10°C / +120°C
Flanged Swing Check Valve Short Type
Check Valves
- Bağlantı
- DIN1092-2
- Çalışma basıncı
- PN16
- Çalışma sıcaklığı
- -10°C / +90°C
site.urun_cta_baslik
site.urun_cta_metin