Flanged Swing Check Valve

Working pressure PN16
Working temperature -10°C / +120°C
Connection type DIN1092-2

Connection DIN1092-2

Working pressure PN16

Working temperature -10°C / +120°C

Get a quote on WhatsApp Datasheet (PDF)

Documents

Product catalog page

PDF 1 page(s) 278 KB EN 30.07.2026

View Download PDF

Source
Metroend-Urun-Katalogu.pdf · printed page 61 (PDF 64)

What it does

Check Valves

A check valve is an automatic safety component that allows fluid to pass in one direction only and closes off reverse flow by itself. It requires no external actuation: closing occurs mechanically when flow stops and back pressure builds up. Check valves are used to prevent backflow and water hammer at pump outlets, to prevent reverse flow on boiler feed lines, and to isolate branches on lines fed from more than one source. Spring-loaded types permit both vertical and horizontal installation, swing types operate with low pressure drop, and dual-plate and disc types are preferred where a short face-to-face dimension is required.

This is a general description of the product type; it has no counterpart in the source catalog and is awaiting company approval. The verified technical values for this product are only in the data plate above and in the dimension table.

Where it is used

Application areas

01 Chemical - Petrochemical
02 Water - Wastewater
03 Heating - Cooling Systems
04 Maritime Applications
05 Mining Applications
06 Power Stations

Source: the “Application Areas” list on this product's catalog page.

Dimensions

Dimension table

9 rows × 9 columns

Flanged Swing Check Valve — Dimension table
DN	ØD	Øk	Øg	L	b	H	Ødxn	KG
40	150	110	88	180	18	249	18x4	9
50	165	125	102	200	20	254	18x4	11
65	185	145	122	240	20	271	18x4	17
80	200	160	138	260	20	311	18x8	20
100	220	180	158	300	24	344	18x8	28
125	250	210	188	350	26	420	18x8	46
150	285	240	212	400	26	498	22x8	61
200	340	295	268	500	30	550	22x12	72
250	405	355	320	600	32	585	26x12	122